What makes a bumper tough? Amplifier bumper: purpose and features of selection
What affects the strength of the structure, making the bumper tough? Amplifier bumper - that's the answer. This part is a crossmember, which is made of plastic or metal. If the support is deformed, repair should be carried out. When restoration is not possible, it is necessary to replace the spare part. Choose an original or duplicate part - a matter of preference. What characteristics have certain components, read the review.
To give rigidity to the front or rear of the car, use a special cross member - bumper amplifier. With the help of this detail during the impact adjacent nodes are not destroyed or are deformed slightly.
One of the most damaged body parts of the vehicle is the bumper.A bumper reinforcement is needed to reduce the mechanical impact on other parts of the car. Automakers are installing two types of front and rear supports:
Polymer cross do not stiffen the structure, so a car with a metal part is more reliable.
The front bumper reinforcement is used to stiffen and fix the lining, in addition to the absorber and brackets. With the help of such a design, only the pad and fasteners are damaged in a collision. Adjacent nodes remain intact or deform to a slight degree.
Power rear bumper performs protective functions. Metal crossbar increases resistance to physical stress. When a part is made of plastic, during a collision, the lining and support are destroyed, and other body elements are deformed.
Before you install the bumper, the bumper amplifier is attached to the design was reliable, resistant to damage. The support is fixed by bolts in the place intended for installation. Then put the absorber (if this part is provided by the manufacturer) and lining. With the help of such body elements, rigidity is ensured.
To install the front bumper reinforcement, the crossmember must be secured with fasteners. Connecting places are recommended to be treated with anti-corrosion compounds to extend the service life of parts.
Amplifier rear bumper mounted to the rear panel. If the cross member has been removed and installed, the attachment points should be treated with a special anti-rust agent. One of these compositions is the Movil autopreservative.
How to choose and buy?
If the bumper has broken, the bumper amplifier cannot be restored, then there are two solutions: to buy, install original spare parts or give preference to parts of third-party brands. The consumer will be able to choose the option that matches the budget.
Original spare parts - components, issued by the OEM-manufacturer. Such body parts are characterized by several features:
- high price;
- full compatibility with the nodes of the car;
- quality performance;
- branded packaging.
To choose the right bumper amplifier, you should use the spare parts catalog by entering the vehicle data: VIN, make, model, year of manufacture.
When it is necessary to save money without compromising the quality of parts, a suitable option is to buy a third-party bumper amplifier. Non-original spare parts attract consumers due to three properties:
- affordable cost;
- minimal difference from OEM products;
- fast deliveries.
Duplicate manufacturers produce all kinds of parts for different car brands, including the Renault, Nissan, and Toyota bumper boosters, so buyers have long appreciated the possibility of saving without sacrificing quality. Non-original parts are selected according to the characteristics of the vehicle: model, year of manufacture, body type. In most cases, analogues are used in the period of post-warranty service.
Amplifier bumper - an important structural part of the car. In the event of support deformation after impact, the crossmember should be repaired or replaced. When there is no desire to experiment, purchase original parts. If you need to save money, the best option is to order a duplicate spare part.