We install the fence from the proflist by our own hands
Today, when personal life becomes sovulnerable, I want to hide from prying eyes. Especially such a need arises in a private house or on a country plot. To ensure that outside observers do not interfere with work and rest, fences around the site are installed. For them, choose a variety of materials: metal rods, wood, brick, stone. However, the most popular material for fences is profnastil, or profiled.
This material is popular due to its low price. In addition, the proflist also has a number of advantages. So, outsiders will not be able to follow what is happening on your site through the fence of the proflist, which, if desired, can be up to 7 meters in height. Such a fence perfectly reflects all the sounds. Moreover, you do not need to hire professionals to install a fence from the profiled sheet. With your hands, having the right tool, it's easy to do. Also, the time spent on installing this fence is not large. Quickly, you can determine where the fence line will pass, install poles and drains and sew it with a profiled sheet. In addition, corrugated board is famous for its durability. Up to 20 years will be a galvanized corrugated board, and more than 30 - a profiled sheeting with a polymer coating. The assortment includes the color and dimensions of the profiled sheet.
In order to install the fence from the profiled sheetwith their own hands, they need common building skills and tools. The process of installing the fence begins from the measurement of the perimeter of the enclosed territory, as well as the location of the gate and the gate and the height of the fence. Immediately, there are places where the fence posts will be installed. The next stage is the installation of support racks. Pillars for support may be steel pipes. It is recommended to take them with a diameter of 57 mm. You can also use profile pipes, the cross section of which must be at least 60x60 mm. The length of the pillars depends on the height of the fence.
After the corner supports are installed andstretched the measuring cord, marking out the remaining supports. They should be strictly along the line at a distance of not more than 3 m from each other. Then we dig pits for each support with a depth of 0.6 m and more, and a width of 20 cm. Each pipe in the pit is leveled. The posts can be fixed using temporary metal or wooden struts. And only now you can pour pits with concrete. This is halfway to how to make a fence from the proflist. If you neglect this and just hammer the supports into the ground, they will constantly be under the influence of moisture and quickly fail, and the fence made of a profiled sheet, with your own hands installed, will not serve a full term.
Three days after the pouring of concreteweld logs - transverse veins. It is best to use steel profile pipes, the cross section of which is 40x25, 60x40. If the height of the fence is not more than 2 m, then two is sufficient. If the fence of the profiled sheet, built with your own hands, is higher, then you need to add one more in the center. To metal parts of the frame served for a long time, without undergoing corrosion, it is necessary to treat them with a metal primer and double paint with enamel.
When the frame is ready, fix the corrugated sheet with the help of self-tapping screws of the same color. They need to be screwed into the cavity of the profile at a distance of 25-35 cm.
Now you know how to build a fence out ofproflista. If small damages are formed on the coating during installation, they can easily be eliminated with paint in the can. You can buy the paint of the right color in the same place as the corrugated board.