Steam room with your own hands. Just about the main thing
Who does not dream of having on his landa good good bathhouse in which you could warm your bones? Of course, the absolute majority of the inhabitants of our country. And anyone, even a little person in this matter, is well aware that the key link is the steam room. It's not difficult to build a sauna with your own hands, it's much harder to do it right.
Steam bath with your own hands is erected enoughjust. To assemble a box is half the battle, it is necessary to divide the inner space correctly into the corresponding zones and properly equip them. And in this matter particular importance should be given to the steam room. About this and talk.
Begin with the definition of sizepremises allocated for the functional area. First, the calculation should take the maximum number of people who can simultaneously be in the steam room. Based on such data and its own dimensions, it is easy to calculate the required area. Secondly, the steam room, with its own hands, should be wide enough for "exercises" with a broom: taking into account the scope of the hand with the bath tool, this parameter should be at least 2 meters.
Arrangement of the steam room
From the school course of physics, it is known thatwarm air rises. This factor must be taken into account when arranging the steam room. Several levels of sitting or lying places should be provided. This approach will allow you to be at the same time indoors to people with different temperature thresholds.
Reduction of heat loss
Steam room, made with his own hands, shouldensure long-term heat preservation. The walls of such rooms should be constructed of materials with low thermal conductivity, i.e. they should isolate warmed air and should not heat themselves. The most suitable material is wood. If the bath is built from a log or logs, then additional wall finishing is by and large not required. The situation is completely different if the construction is made of stone. In this case, without the thermal insulation of the walls can not do. It is quite easy to do this. On the walls inside the room should be fixed frame, in which you need to lay a hard insulation. For example, polystyrene foam. Further, this construction should be covered with a heat shield and covered with a lining or a wooden strip on the entire surface. And the lining should be done freely, to leave the lumber possible to expand. As a result, a person should contact only the tree. Also, the floor and ceiling insulation should be made to reduce heat loss and minimize the possibility of freezing.
To the steam room, created by its own hands, rejoicedover the years, care should be taken to ensure good ventilation. Inflow of air can be arranged through the door. In this case, the heat reserve will not only drain the steam room, but also the washing water.
These are all the key points to be aware ofthose who think how to make a steam room with their own hands correctly. There are, of course, many other nuances, knowledge of which can be useful in the arrangement of this functional node of the bath. But they are not as critical as those that were considered in the framework of this article.