Replacement of the clutch is difficult, but you need to know

In order to start such an activity asreplacement of the clutch, it is not enough just to know the basis of the work in theory. It is necessary to take into account all the subtleties and to possess even the slightest skills of a mechanic. To perform this type of work will require special tools. It is worth noting that the replacement of the clutch on different types of cars is different.

Before you get started, you need to familiarize yourself with theby the mechanism itself, and then proceed to take action. On a car with a front-wheel drive, the clutch replacement is much more difficult than the rear-wheel drive. The first thing to do is to buy a new spare part and a good jack. The best way to lift the machine will be to use the lift, as it will have to remove the entire transmission.

clutch replacementBefore you start, you need to accuratelymake sure that the clutch is no longer functioning. To check, you must press the pedal, the part must open, which will make it easy to switch gears. If there is a characteristic squeak, then this is a clear sign that the clutch needs replacement. Also checked are the cables, the driven drive, the pedal itself and the drive shaft, since often the problem is in them.

clutch replacement vasesAs mentioned earlier, every car hasTheir nuances in this kind of work. So, for example, the replacement of the VAZ clutch differs significantly from the similar process in jeeps, so read the instructions carefully for your car brand before work.

The first thing to do is turn offhydraulic cylinder and battery. Then the machine rises with a jack or put on the stand. Use a container in which the liquid can drain from the transmission, and place it under the part. On the mechanism are electrical wires, which must also be turned off. If the hydraulic driven disk is outside this part, it is also disabled. The starter is also pulled off, after which the bolts on the clutch bell are loosened, and the transmission is removed.

replacing clutch master cylinder

The next step is to install the engine onjack. For this, it is necessary to bring it under the crankcase and install it. After this work is done, you will see the grip itself. To remove it, unscrew the flywheel. Replacing the clutch involves checking the parts that are adjacent to it, as well as an engine that can leak oil. If any parts are worn out, they must be replaced. It may also be necessary to replace the master cylinder clutch, which is made by unscrewing it and installing a new one.

After the installation of a new clutchcomplete, it is necessary to put the rest of the parts in place in the reverse order. The subsequent work of the car depends on this process. If something goes wrong, then the machine will fail.

After the work done, you need to check the levelfluid in the gearbox. If it is less than the norm, then bring it to the necessary. Next, you need to drive a short distance and check the operation of the clutch.



Related news

Replacement of the clutch is difficult, but you need to know Replacement of the clutch is difficult, but you need to know Replacement of the clutch is difficult, but you need to know Replacement of the clutch is difficult, but you need to know Replacement of the clutch is difficult, but you need to know Replacement of the clutch is difficult, but you need to know