How to build a house from the beams with your own hands? A little about the main points
Many would like to become happy ownershis personal country house. And how to fulfill such a desire? It is not necessary to hire professionals and pay a lot of money - you can do everything yourself. In this review will be talked about how to build a house of beams with your own hands.
When building housing from a bar, several factors should be considered:
- Buy a chainsaw - without it the beam will have to saw manually, which is too time-consuming and long. In addition, conventional tools can leave too bright traces of work, which will spoil the quality of the material.
- Buy a concrete mixer. It will come in handy even the smallest. You have to knead the grout for the foundation.
- Answer the question of how to build a house fromsquares with their own hands, best of all together. First, it's more fun, and secondly, if a partner knows how to work, then this will ease the task in half. And thirdly, together you accomplish the volume of tasks much faster.
In general, the whole work is divided into two stages: construction of the foundation and the house itself. It is worthwhile to understand that it takes quite a long time to dig trenches for the foundation. An even longer period is required for pouring concrete and complete hardening of the solution. But without a foundation to solve the question of how to build a house from the beams with your own hands, it will not work. So do the work for two seasons. First of all, as already mentioned above, trenches are being created under the foundation. What will be the depth - it's up to you.It depends on the soil on which the house is built. Also, weather conditions in the region should be taken into account. As a general recommendation, we can say that the deeper the foundation, the more solid the house. So about one and a half meters should be enough. After excavating the trench, formwork should be made. For this it is worth buying six-meter boards. Saw them to the required length will already be in place of construction work. Note that the boards should not "play", otherwise the foundation will turn out to be crooked. Next, we need a film (it is cut by the inner part of the formwork) and the armature (it will go to the frame for the foundation). Remember that the foundation must be strong. Do not skimp on the armature and better make a couple of extra ligaments. After installing the frame, make a concrete mix and fill the foundation. After he has settled, and this will happen in about three weeks, it is necessary to remove the formwork. You can smear the base with mastic, in order to create additional protection, although this is not necessary. The problem of how to build a house from a bar with your own hands is half solved.
Before laying the bar, cover the toppart of the foundation by a pergamon. This will protect it from the moisture of the concrete. When you begin to lay the beam, do not forget to work out the locks. For this purpose a chainsaw is very useful, which will make the work accurate and accurate. After laying two next to the beams, you should make a marking on the floor joists. Before this, do not forget to calculate the perimeter of the last, based on the area of the house. Over the floor beams, the next tier of timber is laid. Pre-select, at what level the windows will be located, and gradually make apertures. Approximately twenty tiers should suffice to completely solve the question of how to build a house of beams with your own hands. Further, beams are installed for the roof, the ceiling is roofed, the rafters are built. To install the roof requires a minimum of two, so do not forget to call comrades to help.
After all the above is done,you will only have to do the facing work. If you have wondered how to build a house from a log house, then there are practically no fundamental differences.