How to adjust plastic windows
As a result of incorrect installation, eitherdue to settling at home, the question arises: how to adjust the plastic windows, because they are experiencing various problems. Sometimes for their elimination you have to call a specialist from the service company. And this entails additional financial costs. To avoid them, it is useful to know how to deal with the problem yourself. This is what the article tells about.
Window handle malfunction
The most common faults areher looseness, or, on the contrary, she turns with difficulty. In the first case, the installation of the handle-lock will help. This method will show how to adjust the plastic windows so that your child can not open them independently. To do this, you need to rotate the plate at the base of this part to ninety degrees. In this position, the screws holding the handle to the window will be clearly visible. They need to be turned away to remove it, and attach a new one. It is mandatory to install a "comb" in the base of the handle - this is the nameplate of the ventilator regulator. Locks of plastic windows must be adjusted periodically to avoid their breakage. As a care for them you need to use a special lubricant. It can also handle all the metal parts of the window.
The second defect is manifested when the handleThe open window is turned down and does not rotate, which makes it impossible to close the window. This is due to the rotary lock of this part. It happens that it is triggered during the sudden rotation of the handle in different positions. To solve the problem, it is important to know how to adjust the plastic windows equipped with different fittings.
Thus, the brand "AUBI" assumes the presence of a fineplate made of metal, which with a spring is located near the handle. The plate should be pressed with a finger to the seal and then turn the knob. The window leaf should be at this time in an upright position. If it is open at an angle, the lock will also interfere with the rotation of the handle. After aligning the position of the window and pressing it against the plate sealer, you can turn the handle to the "open" position and then close the window.
In the fittings "GU", "Roto" and others. there is a metal tab located below the handle. It is located at an angle to the frame. It is necessary to press on it so that it is parallel to the rubber of the sealant. At the same time, turn the handle gently until it is in the desired position. Modern fittings are available with cornering benders that operate in the open state, or in the rotary-tilt position. This allows you to protect the window from accidental breakage by the consumer.
Inflating due to seal
Plastic windows necessarily needadjustment. If you do not do this in a timely manner, then there will be a deformation of the window design and the seal of the seals is broken, and from there it starts to blow out from under them. You can so adjust the plastic windows that the defect will be eliminated. To do this, follow the instructions and fix the clamp of the window hardware. For example, the "Roto" fittings require, for repairing the malfunction, to turn the bolts with the floating body - eccentrics - with a hexagonal key. In other accessories, rollers are used as movable elements, on the edge of which there is a point. It should be turned closer to the seal. From this depends the density of adherence of the leaf.
Swaying sash windows
Let's consider one more widespread variantbreakage of plastic windows. Namely, how to adjust the plastic windows, if the leaf has slackened and touches the fittings and other elements during opening and closing. To lift the sagging flap into the hole in its end, it is necessary to insert the hexagon and turn it clockwise. In this case, pull the wing to the hinge, as a result of which its lower part is raised.
Having in the apartment plastic windows, the adjustment of which is carried out qualitatively, you will provide your house with warmth and comfort.