Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages

What could be more fun than a trip to the country? Many will say: "A trip to the sea, rest at home." But in reality, there is nothing better than to quietly observe the result of your work. “Why calm? - again, there may be a question. - In the country you need to work, water, care. No, if you approach this matter wisely.

Systems of drip irrigation of plants from plastic bottles and not only

Any modernization should include several factors: efficiency, transience, expediency, ease of operation and low cost. Only this combination will give the desired result. All of the above does not bypass the side of agriculture. Indeed, in any work you need intensive development,especially if it comes to hard work.

The first thing that comes to mind in the expression “modernization of the economy in crop production” is drip irrigation. Drip irrigation systems known to mankind for a long time. Since more than once attempts were made to change ordinary, inefficient watering, leaving behind only the swamp.

drip bottle watering imperfectionsBut each time with each new development such a good word as development, rested against the barrier of lack of money. Yes, yes, even now in any market you can find special hoses, devices, valves - all of them are designed for something right. But at what cost?

There is an alternative

Factory irrigation systems are very expensive, and any repairs will result in large financial investments. Therefore, every time you have to look for an alternative. The system of drip irrigation from bottles is a real way out of this situation.drip irrigation of plastic bottles with their own handsWhy? Because plastic containers (and not only them) combine all the above factors, namely low cost, efficiency and low cost.

Drip irrigation

Everyone can make drip irrigation from plastic bottles.The ways of making systems, fortunately, are simple even for a beginner.

drip watering their own plastic bottlesMost often, the basis is the most common and cheap product - plastic bottles. These containers have a remarkable feature: they do not limit imagination and, most importantly, possibilities. Therefore, there are so many options for exploiting this material at hand.

If you list all ever described methods of drip irrigation, then we can distinguish two main groups. The first is ground watering. The second is watering under the ground. Absolutely each has its own advantages and disadvantages. But everyone has something in common, of course.

Positive sides

So, in fact, the advantages of the drip irrigation. Everyone can do drip irrigation of plastic bottles with their own hands, for such a procedure does not necessarily have any knowledge, skills and even experience in this matter is not needed. And this means that any system will cost almost free of charge, without investments. And the first positive property of homemade watering is cheap.plastic drip irrigation methodsThe second property includes two concepts. Saving (both time and money) and care.On the first sign, everything is clear: to fill the vessels much faster than to stand with a spray for hours, or something worse - to walk with a heavy watering can around the garden. Also drip irrigation "from nature" is devoid of the factor of waste of water. Moisture goes where it should. Because of this, water consumption is much reduced, and payments become less. The second sign is called "care." It would seem that there is such a thing. There is water - the plant lives, there is no water - it dies. And not everything is so simple. Scientists have shown that drip irrigation strengthens the root system of plants, and this is already a great harvest. The third plus is expediency. It is no secret that a weed often breaks through between cultivated plants. From standard watering (and it affects absolutely the entire surface), the soil is also moistened in the places where unwanted weeds grow. Drip irrigation, organized from plastic bottles, organized, does not imply the "feeding" of weed. From this it follows that we will have to weed and tear the grass only after the rain. It often happens that there is no one to look after your favorite landing. And often come to water - there is no possibility. No problem. Drip irrigation from plastic bottles, built with his own hands, can even do his job without human intervention. Well, the last.Installation of this system does not carry anything. It is easy and simple. And most importantly, at any time you can replace the failed part.

First option

This system will belong to the first group: ground irrigation. In addition to the already known materials - backs and water, here you will also need a few auxiliary items: a ballpoint pen stem, wax, a stationery knife, preferably sharp, and an awl.Drip irrigation systems for plants from plastic bottles and not onlySo, the first type of system is terrestrial, therefore, containers with water will be located next to the stem of the plant. Very convenient location, as the replacement of something broken and, conversely, the "refilling" with water will occur without any effort and unnecessary interventions. Get to the point! Not far from the end of the bottle with the help of awls you need to make a small hole. For convenience, the iron base of the instrument can be heated. Then the resulting hole will be neat and small, which is only necessary for a good result. Next, you need to do some manipulations with the rod. The writing part as unnecessary is required to be removed, it can be cut off with a clerical knife. The remaining tube should be cleaned of quality ink from gasoline. Then the ballpoint pen rod should be inserted into the bottle hole.Place the seam preferably waxed in order to avoid unwanted leaks. The design is almost ready. It remains to plug the last end of the tube, because even its small diameter is too large, and there is a very small hole with an awl. It turned out some kind of crane. If in five minutes ten drops fall out, then the "installation" with a volume of two liters with a head is enough for two or three watering.

Drip irrigation from plastic bottles with their own hands: the second option

The second irrigation system will be underground irrigation. Just want to note that she has some flaws, but more on that later. To create such a system will take a little more effort. Difficulties gives location (land). Most often gardeners use the following version of the organization of bottles. To do this, close to the bottom is required to make several circular holes. In size, they should be no more than 2 millimeters, otherwise the water will come out too quickly. Such an installation is buried in the ground between a group of plants. Everything, drip irrigation, with their own hands made of plastic bottles, is ready.

Negative sides

Everything has its drawbacks, even drip watering from bottles. The disadvantages are often the same, but they can not be avoided. What is the first type of system: they are durable, easy to operate. But at the slightest contamination of water or when litter enters the container, small holes are clogged. And sometimes it becomes impossible to clean them. Therefore it is necessary to change some nodes.bottle drip irrigation systemsThe second type of system, of course, is itself in the ground. From this hole often clogged. But the installation of the second type, in contrast to the first option, you can pull out and rinse, which increases their service life. Another disadvantage is the risk of damage to the root system. Bottles can touch the roots, and this is already a bad influence on the life of the plant.

Conclusion

Everyone can do drip irrigation of plastic bottles with their own hands. You do not need to be a jack of all trades. Own watering system is always additional convenience. What else do gardeners need? Convenience, a little work and the contemplation of their labor.

Related news

Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages image, picture, imagery


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 8


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 58


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 82


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 58


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 37


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 55


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 95


Drip irrigation from plastic bottles with their own hands: ways to create, the advantages and disadvantages 67