"Country Arrow" (greenhouse). Assembly Features
Only in self-cultivated culturescan retain all the most useful substances and natural taste qualities. Because so many work on their sites dachnikov, who take care of every bush. Only in the early spring on the open ground it is impossible to harvest. Here, "Dachnaya Strelka" can help out the greenhouse, which is capable for many years to be a worthy assistant to its owners.
Features of the greenhouse
It was invented not so long ago, in 2011, but alreadyhas gained considerable popularity. Greenhouse "Dachnaya Strelka" reviews from users gathered the most positive. This is facilitated by a number of its advantages over other similar structures.
The greenhouse is similar to arched and gableconstruction, possessing the most positive of their qualities. Its walls are slightly curved, so that the greenhouse "Dachnaya Strelka" made of polycarbonate has a free area much larger at a lower height.
Due to its high strength and featuresThe structure of the greenhouse can be used in areas with a harsh climate. Assistant gardeners are able to withstand a meter of caked and up to 2 meters of newly fallen snow (this is about 1 square meter of a horizontal surface of 450 kg). However, snow and ice masses do not accumulate in large quantities on a greenhouse, which has the shape of an arrow. Thanks to all these qualities, the "Dachnaya Strelka" greenhouse has collected the most enthusiastic reviews from the users and is very popular.
"Dachnaya Strelka" (greenhouse) consists of enougha durable galvanized profile, which is covered with polycarbonate. The rubber profile makes it possible to cover technological gaps on the ends of the frame and to further insulate the structure. The height of the Dachnaya Strelka is 2.5 m, its width is 3 m, which allows it to accommodate 2 beds and grow quite tall crops on them. The length of the structure, thanks to additional extension bags with 2 m inserts, you can do any.
Greenhouse coating - polycarbonate - a material,which is a transparent panel of honeycomb structure. It consists of 2 or more layers, interconnected by stiffeners. The air in the cavities provides good thermal insulation. The existing stiffeners give this design additional strength characteristics. All structures of this material are stable and reliable.
Transparent polycarbonate, specially designed for greenhouses and hothouses, has many advantages:
- the impact resistance of this material exceeds the corresponding index of glass by 250 times;
- Due to the lightness of the polycarbonate, the load on the foundation is significantly reduced;
- can significantly reduce the maintenance costs of the greenhouse;
- protects plants from penetration of direct sunlight;
- the polycarbonate service life is long enough;
- for the installation does not need special skills.
The standard set of greenhouses includes panels,having a thickness of 4 mm. If desired, they can be replaced by another model, which is 1.5 times thicker. "Dachnaya Strelka" (greenhouse) has a door and a ventilator at two ends. Individually, side transoms with an automatic or mechanical opening method can be ordered. The kit also includes a fairly comfortable handle, which allows you to close the door from the inside and outside.
The manufacturer provides for delivery andinstallation of greenhouses, but you can do this on your own. For convenience of transportation polycarbonate is rolled up into one roll, the length of which is 2.1 meters, diameter - 1.2 meters. The frame of this greenhouse can fit in the trunk of a car.
Greenhouse «Dachnaya Strelka»: assembly
Construction by own forces can without specialefforts to gather two people. A detailed illustrated step-by-step instruction is attached. The kit includes all the necessary fittings. Every detail is marked. The frame is assembled using screws and nuts. You need the following tools to complete the job:
- Hacksaw or electric jigsaw.
- Construction knife.
- Roulette, drill and level.
The structure is assembled directly on siteits installation. "Dachnaya Strelka" (greenhouse) should not be installed near buildings and trees, so that snow and ice do not fall on it. The distance from them should be more than 1 meter.
The frame on the ground is fixed by the way of instilling the carcass endings - special T-shaped flights.
Sheets of cellular polycarbonate are attached to the framework of the greenhouse with a special wire bandage.