Built-in refrigerators: sizes, technical features
Built-in technology is becoming popular, because thanks to this the most courageous design decisions are realized. It is necessary to approach to buying a refrigerator responsibly, the equipment is expensive and is purchased for a long time. What to look for when buying embedded equipment?
Pluses built-in refrigerators
Built-in appliances will suit any kitchen. Color equipment does not have to choose from the range, which will be in the store. The company engaged in the manufacture of furniture, will close the refrigerator door with the material used in the installation of the kitchen.
Built-in refrigerators are smaller than their counterparts. This quality allows you to save kitchen space and use it as much as possible useful.
Refrigerators for built-in furniture have high thermal insulation properties, which makes them more economical than ordinary units.
Panels covering the facade reduce the noise level of a working refrigerator. Such products produce less sound than standard units.
Cons built-in refrigerators
Built-in refrigerators have different sizes, which affects the volume of chambers. Reducing the freezer or refrigerator compartment reduces the amount of food that can be placed inside. But there are commercially available models of built-in refrigerators of standard size or even larger.
The price of embedded equipment is always a little higher than the usual one with the same set of functions. This rule applies to refrigerators and freezers.
At installation the case for the built-in refrigerator is required. Dimensions must clearly coincide with the embedded technology. The difficulty in the installation can be considered a minus for this type of equipment, one cannot do without the help of specialists. This leads to an increase in the cost of integrated technology compared to the rest.
The equipment has dimensions that are considered standard for a refrigerator - 0.6 x 0.6 x 1.7 m. Any deviation from these dimensions is not a standard. The internal volume can vary in the range of 260 - 350 liters.
The dimensions of the equipment are determined based on the area of the kitchen, this also applies to the built-in refrigerators. Height parameters can be from 80 to 170 cm, sometimes there are models and more.
In tiny kitchens an excellent option would be to place the refrigerator in the worktop. For two residents of this volume is quite enough, but for a family with a child is likely to be small.
The volume of products that you plan to place should be free on the shelves. Air must circulate between them, allowing the vegetables and fruits to remain fresh.
For large-scale kitchens, you can use a large fridge with two doors. The size of the cabinet under the built-in refrigerator can be any. Furniture makers will realize any fantasy, the main thing is to determine the model and correlate its volume with the kitchen area.
Partially integrated refrigerator
In the store there are instances that are partially embedded in kitchen furniture. They have a front door and unfinished side panels. From the outside it will seem that the house is an unmovable model. But partially embedded technology has an additional insulating layer and costs a little less than its fully embedded counterparts.
The front panel does not need refinement and does not always fit the interior.The low price and lack of gaps between the device and the rest of the kitchen make a built-in refrigerator popular. The dimensions of the cabinet are selected individually.
In the refrigerator there can be one chamber or two. It depends on the amount of food your family needs and the size of the kitchen.
A freezer is required if the family freezes food for the future. It is convenient to use the function of instant freezing. Berries, vegetables are frozen for several minutes and retain their beneficial properties. The volume occupied by the freezer can be any, depends on your preferences and almost does not affect the size of the built-in refrigerator.
In some built-in models, there are fresh areas in which it is convenient to store fresh greens, vegetables and fruits. Separate door and adjustable humidity keep food fresh for a long time.
The main function of any refrigerator is to maintain temperature and preserve food. But the new models have features that make life easier for the consumer.
Built-in refrigerator with standard sizes should be endowed with features that accelerate the care of equipment.The defrosting process should be minimal, excessive moisture can spoil the appearance of the coating. The water under the furniture will lead to swelling of the board and a damaged kitchen facade.
The main type of defrosting, which is used in most refrigerators, is the "weeping" wall. Droplets of moisture flow down the back wall of the vehicle and fall into a special pan. Next, the liquid evaporates and there is no need for regular defrosting. However, 2 times a year it is necessary to turn off the product to remove excess ice in the freezer, thus avoiding breakage of equipment. If you suspect overheating, defrosting should be held out of plan.
Another option for the refrigerator is the No Frost function. Such refrigerators are more expensive than their fellows, but they allow defrosting once a year and do not allow snow and ice to accumulate in the freezer. Purchased equipment is longer, more economical and easier to use.
Removable battery allows you to maintain the desired temperature for some time. The function depends on the model and can work from several hours to days.Used during a power outage in the house.
A signal from an open door will remind you that it is not closed and will allow you to avoid defrosting.
Doors and compartments with automatic closers close themselves if your hands are busy.
For women, the actual compartment for storing cosmetics, you can also store medicines.
If there is an opportunity to buy built-in appliances with additional functions, then they can simplify your life, but the main thing is to fit the built-in refrigerator in dimensions for embedding, perform the basic function and fit into the interior.
Antibacterial coating appeared in almost all new models, both embedded and autonomous. Allows you to keep food fresh longer.
The reliability of the refrigerator is directly dependent on the quality of the built-in compressor. The smaller the load, the longer the built-in model will last. If the built-in unit breaks, you will have to change it to the same with the same dimensions. You cannot move it to another place, and you will have to call in specialists for replacement.
In order not to get into an unpleasant situation, you should choose a built-in refrigerator with a separate compressor for each compartment.Such models are more expensive, but do not have to worry in case of failure of the compressor unit.
Product characteristics determine the climatic conditions in which it can work:
- T - this refrigerator can operate at temperatures up to +43;
- ST - temperature mode of the refrigerator from +18 to +38;
- SN - at temperatures above +32 or below +10 the equipment can fail;
- N - standard work temperature from +16 to + 32.
Built-in refrigerator design
Depending on the size of the kitchen, interior and the presence of a built-in refrigerator, determine the appearance of the door. A small built-in refrigerator with the dimensions of the facade up to 85 cm allows you to install appliances in the countertop. It is common for the refrigerator to vibrate during operation, so pay attention to the correct installation of the appliance. There should be a gap between the side walls of the kitchen appliances and the boards of the kitchen unit. Otherwise, the vibration will lead to loss of strength of the furniture.
Large models of the refrigerator can be externally attractive and fit the design of the kitchen, made in a modern version. You can buy them for partial embedding or full.Electronic sensors or taps for water supply can be installed on the door.
The refrigerator, built into the kitchen, is perfect in design and resembles a cupboard. Full integration is better to entrust professionals who will adjust the size of the cabinet under the technique. In-house installation can lead to a short service life.
The usual stand-alone unit can be built into the interior of the kitchen, but it will not look so harmonious.
Features of the doors of the built-in refrigerator
The built-in refrigerators use two options for opening doors.
In the first case, runners are used, the door slides, as on wheels. With this method, the dirt is clogged in the corners of the mechanism and eventually leads to unnecessary sounds. It is quite problematic to clean the dirt from the runners. Door opening width is only 90 degrees.
Another option is the hinges. This is the easiest and most reliable way. The door opens to 110 degrees. The method is almost devoid of flaws and more durable.
Service of the built-in refrigerator
Care of the built-in refrigerator is no different from stand-alone. It is necessary to start from the moment of purchase, for example, the manufacturer of the built-in refrigerator “Atlant” recommends. Dimensions of the device do not affect the basic requirements:
- lack of direct sunlight and near heating devices;
- 50 cm minimum distance from the built-in freezer to the stove;
- lack of a warm floor under the equipment;
Cleaning equipment should be carried out in a timely manner, the thickness of the ice and snow should not exceed 5 cm.
When washing the unit, make sure that water does not fall behind the gum seal and to the bottom of the freezer.
The use of sharp objects to remove frost is unacceptable. It is necessary to wait for the natural thawing of ice.